Heating Guide
Furnace Replacement Cost in Massachusetts (2026)
In This Guide
A new furnace costs $1,600 to $10,000 installed according to This Old House, with an average of $4,799. Fixr puts most replacements at $2,800 to $7,500 and about $4,800 on average. Gas furnaces run $3,800 to $10,000 and oil furnaces about $6,700 to $10,000 in both sources. New ductwork, permits and fuel lines come on top.
Furnace replacement cost depends mostly on the fuel your home uses, the size of the house and whether the ducts can stay. The prices below come from This Old House (updated April 2026, based on HomeAdvisor estimates) and Fixr (updated January 2026). They are national figures, so use them to plan and compare, then get written quotes for your own house.
How Much Does a New Furnace Cost by Fuel Type?
| Fuel | This Old House (2026) | Fixr (2026) |
|---|---|---|
| Natural gas | $3,800 to $10,000 | $3,800 to $10,000 |
| Oil | $6,750 to $10,000 | $6,700 to $10,000 |
| Electric | $2,000 to $7,000 | $1,800 to $7,300 |
| Propane | Not listed | $3,700 to $14,200 |
| All types | $1,600 to $10,000 (average $4,799) | $2,800 to $7,500 (average $4,800) |
This Old House adds that a natural gas furnace can cost an average of $6,900. Oil and gas carry the higher prices in both sources, and the two agree closely on those ranges.
How Does Home Size Change the Price?
A bigger house needs more heating output, measured in BTUs. Fixr lists these ranges by home size and furnace output:
| Home size | Furnace output | Fixr range |
|---|---|---|
| 1,000 sq ft | 30,000 to 60,000 BTU | $1,200 to $2,000 |
| 1,500 sq ft | 45,000 to 90,000 BTU | $1,800 to $3,000 |
| 2,000 sq ft | 60,000 to 120,000 BTU | $2,400 to $4,000 |
| 2,500 sq ft | 75,000 to 150,000 BTU | $3,000 to $5,000 |
| 3,000 sq ft | 90,000 to 180,000 BTU | $3,600 to $6,000 |
| 4,000 sq ft | 120,000 to 240,000 BTU | $4,800 to $8,000 |
These size ranges sit below Fixr's full installed averages, so read them as a guide to how price climbs with output, not as a final number. This Old House lists furnaces from 40,000 to 120,000 BTU for most homes.
What Else Adds to the Bill?
Fixr breaks out the extras that most often change a quote:
- Whole-house ductwork installation: $1,400 to $6,000. Repairs or minor replacements run $5 to $45 per linear foot.
- New gas or oil fuel lines: $9 to $27 per linear foot.
- A 250-gallon oil or propane tank: $600 to $2,500.
- Permits: anywhere from $50 to $1,500, depending on the town.
- Removing the old furnace: $50 to $330.
- Labor: $300 to $1,800 for the installation, or 10% to 40% of the total.
This Old House gives no dollar figure for these items but notes that new ductwork or venting can significantly increase the total cost. Ask every contractor to list these lines separately so the quotes compare fairly.
Planning a heating or cooling upgrade?
Tell us about your home and what you want to change, and we will reach out to talk it through.
Ask About Your ProjectIs a High-Efficiency Furnace Worth It?
This Old House defines a high-efficiency furnace as one with a 90% AFUE rating or higher and says these units cost more upfront. ENERGY STAR puts numbers on the savings: certified gas furnaces in the northern U.S. are up to 18 percent more energy efficient than baseline models and can save $160 a year in energy costs. Certified oil furnaces are up to 4 percent more efficient and save about $90 a year.
Massachusetts winters are long, which is exactly where those yearly savings add up over a furnace's life.
Should You Repair, Replace or Switch to a Heat Pump?
This Old House says most furnaces last between 15 and 25 years and tend to start breaking down more often once they are 15 years old. Its rule: if the repair costs less than half the price of a new furnace, it is usually worth repairing. Fixr gives 15 to 20 years for most furnaces, up to 25 for oil and 20 to 30 for electric. More warning signs are in our furnace lifespan guide.
If you are replacing anyway, price a heat pump too. It heats and cools with one system, and the Department of Energy says modern air-source heat pumps can reduce electricity use by 50% compared to furnaces and baseboard heaters. Compare both in our heat pump vs. furnace cost guide, and check current incentives in our Mass Save heat pump rebate guide. The federal energy efficient home improvement credit no longer applies to new installs: the IRS says it covered qualifying property placed in service before December 31, 2025. Some cost guides still mention it, so do not count on it in your budget.
The Bottom Line
Budget about $4,800 for an average furnace replacement, and $3,800 to $10,000 for gas or oil, before ductwork and permits. Get itemized quotes, and price a heat pump alongside the furnace. Ask About Your Project
FAQ
How much does it cost to replace a furnace in Massachusetts?
National 2026 averages are about $4,799 (This Old House) and $4,800 (Fixr). Gas furnaces run $3,800 to $10,000 and oil furnaces $6,700 to $10,000.
Is a gas or oil furnace cheaper to install?
Both sources put oil higher at the low end: about $6,700 to $10,000 for oil versus $3,800 to $10,000 for gas.
How much does new ductwork add?
Fixr puts a whole-house ductwork installation at $1,400 to $6,000, and repairs at $5 to $45 per linear foot.
When should I replace instead of repair?
This Old House says repairing usually makes sense when the repair costs less than half the price of a new furnace. Furnaces last 15 to 25 years and break down more often after 15.
Is there still a federal tax credit for a new furnace?
Not for new installs. The IRS says the energy efficient home improvement credit covered property placed in service before December 31, 2025.