Siding Guide
James Hardie Siding Cost in Massachusetts (2026)
By Dioclecio Gomes, Founder & Owner4 min readUpdated October 20, 2026
In This Guide
Mr. Gomes Remodeling, a Massachusetts siding contractor since 2003, prices James Hardie fiber cement on a typical 1,500 to 2,000 square foot colonial at $15,000 to $28,000 installed. Nationally, This Old House and Fixr both put fiber cement at about $5 to $14 per square foot installed, and board and batten costs the most to install. The 2025 Cost vs. Value report, as cited by Consumer Reports, says fiber cement siding recoups 114 percent of its cost at resale.
James Hardie siding cost comes down to three things: how much wall area you have, which profile you pick and what is under the old siding. Our Massachusetts price comes from our siding replacement page. National figures come from This Old House and Fixr, and resale data from Consumer Reports. Weighing it against vinyl? See our vinyl vs fiber cement comparison.
How Much Does James Hardie Siding Cost in Massachusetts?
Our installed price for James Hardie fiber cement on a typical 1,500 to 2,000 square foot Massachusetts colonial is $15,000 to $28,000, depending on the size of the home and the prep work. Vinyl on the same house runs $8,000 to $16,000. National numbers are close: This Old House puts the average fiber cement project at $14,674, and Fixr puts the average at $15,000 with most homeowners paying $8,000 to $26,600. We give you a written price after measuring the house; the full breakdown for every material is in our siding replacement cost guide.
What Does James Hardie Siding Cost per Square Foot?
About $5 to $14 per square foot installed, according to both This Old House and Fixr. This Old House breaks out the pieces:
| Item | Cost per square foot |
|---|---|
| Fiber cement, installed | $5 to $14 |
| Labor alone | $2 to $8 |
| Removing the old siding | $0.70 to $2 |
| Repainting later | About $2.50 |
Remember that siding is priced on wall area, not floor area. Fixr estimates a 2,000 square foot home needs about 1,800 to 2,000 square feet of siding.
Does Board and Batten Cost More Than Lap Siding?
Yes. Fixr says fiber cement board and batten costs the most to install, because the pieces are heavy and need more than one installer. Its installed prices by style:
| Style | Installed cost per square foot (Fixr) |
|---|---|
| Planks (lap siding, like HardiePlank) | $4 to $14 |
| Shingles | $6 to $20 |
| Panels (used for board and batten) | $6.50 to $22 |
The white board and batten home at the top of this page is one of our siding replacements.
What Does It Cost for My Size of House?
Fixr's ranges by home size, for fiber cement installed:
| Home size | Siding needed | Cost range |
|---|---|---|
| 1,000 sq ft | 1,200 to 1,300 sq ft | $6,000 to $18,200 |
| 1,500 sq ft | 1,600 to 1,800 sq ft | $8,000 to $25,200 |
| 2,000 sq ft | 1,800 to 2,000 sq ft | $9,000 to $28,000 |
| 2,500 sq ft | 2,000 to 2,200 sq ft | $10,000 to $30,800 |
| 3,000 sq ft | 2,300 to 2,500 sq ft | $11,500 to $35,000 |
Want a real price for James Hardie on your house?
We measure the walls, check what is under the old siding and give you a written price after a free in-home visit.
Get a Free Siding EstimateDoes James Hardie Siding Increase Home Value?
It is one of the best returns in remodeling. Consumer Reports, citing the 2025 Cost vs. Value report in JLC, says replacing siding with fiber cement recoups 114 percent of its cost at resale, compared with 97 percent for vinyl. The average fiber cement job in that report tops $21,000 and the average vinyl job costs nearly $18,000. Those are national averages, so your neighborhood and market timing still matter.
How Does Fiber Cement Hold Up in New England Winters?
Well, if the paint is kept up. Consumer Reports says fiber cement is fireproof and insectproof, but can be damaged by water during freezes and thaws if its paint is allowed to degrade, and must be refinished periodically, though less often than wood. This Old House says fiber cement can last 50 years with proper installation, notes that some companies offer a 30-year warranty, and recommends spraying the siding with water every six to 12 months and checking caulked joints for leaks. In Massachusetts, careful flashing and sealed cut edges matter as much as the board itself.
The Bottom Line
For a typical Massachusetts colonial, plan on $15,000 to $28,000 for James Hardie installed, more for board and batten or a large home, and expect one of the best resale returns of any exterior project. For a written price on your house, call Mr. Gomes Remodeling at (508) 304-3447 or see our siding replacement page.
Get a Free Siding EstimateFAQ
How much does James Hardie siding cost in Massachusetts?
Mr. Gomes Remodeling prices James Hardie fiber cement on a typical 1,500 to 2,000 square foot Massachusetts colonial at $15,000 to $28,000 installed, depending on home size and prep work.
How much is James Hardie siding per square foot installed?
This Old House and Fixr both put fiber cement at about $5 to $14 per square foot installed. Board and batten panels run higher, $6.50 to $22 per square foot according to Fixr.
Is James Hardie board and batten more expensive?
Yes. Fixr says fiber cement board and batten costs the most to install because the pieces are heavy and need multiple installers.
Is James Hardie siding worth it compared with vinyl?
Consumer Reports, citing the 2025 Cost vs. Value report, says fiber cement recoups 114 percent of its cost at resale versus 97 percent for vinyl. It costs more up front: $15,000 to $28,000 for fiber cement versus $8,000 to $16,000 for vinyl on a typical Massachusetts colonial, in our pricing.
How long does James Hardie siding last?
This Old House says fiber cement can last 50 years with proper installation. Consumer Reports notes it needs its paint maintained, because freeze-thaw water damage can start where the finish degrades.